Price: $201.47
(as of Dec 29, 2023 16:55:07 UTC – Details)
Product Description
2 Stroke 32.66CC Gas Powered Hammer Drill Machine
The hammer machine is made of premium aluminum and plastic with high strength. The three functions (hammer/drill/pick) can meet your various needs and the powerful engine can promote your efficient work. It is an ideal choice for electricians, carpenters, etc.The 2 stroke engine with high power (1200W) and large displacement (32.66CC), as well as an enlarged thick-walled cylinder, can achieve a high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate concrete, bricks, rocks, etc with a high speed (5000rpm).Equipped with three drill bits and two different chisels, it can be used for hammer, drill, or pick by adjusting the knob on the side to meet your diversified needs .
Package Included:
1* Hammer Drilling Machine
3* Drills
1* Point Chisel
1* Flat Chisel
1* Fuel Tank
1* Funnel
Other Accessories for Assembly
Installation: 1.Press down the collet. 2.Put in a drill bit or chisel. 3.Release your hand. 4.The installation is complete.
Applications:
– Hammer Function (Drilling While Hammering)
Scope of Application:
This applies to drilling holes in concrete, floors, brick walls, stones, and solid walls. It is suitable for electricians and carpenters.
– Pick Function (Hammer Without Drilling)
Scope of Application:
It is suitable for crushing, chiseling, digging, grooving, cutting, and other operations on concrete, masonry structure, and asphalt pavement.
The built-in carburetor can fully atomize fuel to decrease its consumption rate to save costs. The built-in air filter can well filter impurities in gasoline to reduce engine consumption and extend its service life. The wireless design can improve the flexibility of operation. You can pull the rope to start the machine. The throttle switch, one-button flameout switch, and non-skid auxiliary handle allow for convenient use. The semi-translucent&large fuel tank (0.9L) can avoid frequent adding. The internal silencer can reduce the noise (≤104dB) when in use to protect your hearing.
Color: Black Material: Aluminum, Plastic Style: Modern Surface Treatment: Painted Process Assembly Required: Yes Power: 1200W Displacement: 32.66CC Engine Type: Single Cylinder, Air Cooling, 2-stroke Impact Frequency: 3200min-1 Impact Energy: 30J Max Torque and Speed: 1.5N.m/5000rpm Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil) Fuel Tank Capacity: 0.9L/0.2gal/30Oz Fuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per Hour Max Drilling Diameter: 40mm/1.5inch Starter System: Hand Pull Start
Noise: ≤104dB Net Weight (Exclude Drill): About 10.5kg/23lbs Product Size (L*H): 63*24cm/24*9inch Engine Size: 36*32mm/14*12inch Drill Size: 22*350mm/0.8*13inch Point Chisel Size: 18*350mm/0.7*13inch Flat Chisel Size: 16*280mm/6*11inch Auxiliary Handle Length: 13cm/5inch
Product Details:
Notes:
1.Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder.
2.Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally.
3.Please add lubricating oil regularly to ensure strong power.
4.Please do not touch the muffler exhaust hole to avoid scalding.
5.The mixing ratio of gasoline and engine oil is generally 25:1, but due to the difference of engine oil quality in different regions, we recommend the ratio of 20:1. Please do not use cheap inferior engine oil.
6.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
【Exceptional Performance】: The two-stroke engine with high power (1200W) and large displacement (32.66CC), as well as an enlarged thick-walled cylinder, can achieve a high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate concrete, bricks, rocks, etc with a high speed (5000rpm).
【Effortless Control】: This Demolition Jack Hammer Can Make Light Work of Breaking up Concrete and Block Quickly and Easily. It Is Powerful Enough for Most Heavy-duty Job Applications, for Effortless Control. Easily increase your productivity.
【Maximum Comfort】: The special D shape handle can absorb vibration to relieve muscle fatigue. The cooling holes will effectively dissipate heat and lift the security to a higher level. At the same time, the maintenance of the machine is also very easy. The internal silencer can reduce the noise (≤104dB) when in use to protect your hearing.
【Complete Accessories】: The package includes: 1* Hammer Drilling Machine;3* Drills;1* Point Chisel;1* Flat Chisel;1* Fuel Tank;1* Funnel;Other Accessories for Assembly. You can pull the rope to start the machine. Besides, the throttle switch, one-button flameout switch, and non-skid auxiliary handle allow for convenient use.
【Wide Range of Application】: The jack hammer gains itself good fame in demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, etc. You may find it applicable for various situations by its versatility, such as plumbing, mechanical installation, construction of water supply and drainage facilities, interior.
Reviews
There are no reviews yet.